Update firmware H8 and H8R [160615]

We brought back the popular resolution 720p120fps! Please update with caution and follow directions below!

H8



Download [160615LY]


H8R




Download [160615LY]


There's a risk that the camera may brick if the update process is not executed properly, please use with caution or contact us for more support.

1. Format the micro SD card. Unzip the files and copy the SPHOST.BRN on to the micro SD card.  

2. Please update it when the battery is at 80% or more, or connect it to the charger before updating.  

3. Turn off the camera, plug the micro SD card into the camera.  

4. Press the on/off (mode) button, the camera will automatically start the update (screen will display "FW Update"). After the update completes, the red light will shut off.  

5. Take out the micro SD card and then reboot the camera.

6. Go to settings and select RESET. This is an important step.

7. Turn off the camera and turn on the camera to make sure update has been successful.

8. Remember to reformat the micro SD card before using it again. Reformat it on the computer before using.

[full_width]